FLUENT is a computational fluid dynamics (CFD) software which consists of modeling capabilities needed to simulate flow, turbulence, heat transfer and chemical reactions for a wide range of applications. It is an integral part in the design and optimization process of any product development.
FLUENT has a wide range of boundary conditions that allows the flow to enter and exit the domain. This article helps you in selecting the appropriate boundary conditions for your specific application.
There are about 10 different types of flow inlet and exit boundary condition options in FLUENT.
1) VELOCITY INLET - It is used to define the velocity and other properties of the flow at the inlet. Intended for in-compressible flows
2) PRESSURE INLET - It is used to define the total pressure and other properties of the flow at the inlet. Flow direction must be defined else non-physical results can occur. Suitable for both compressible and in-compressible flows. Outflow can occur at pressure inlet conditions.
3) MASS FLOW INLET - It is used in compressible flows to define the mass flow rate at the inlet. It is not necessary in in-compressible flows as the velocity inlet itself fixes the mass flow rate.
4) PRESSURE OUTLET - It is used to define the static pressure at the outlet. It often gives better rate of convergence when back-flow occurs. Back-flow can occur at pressure outlet conditions and is assumed to be normal to the boundary. This must be used when problem is set up with pressure inlet.
5) PRESSURE FAR-FIELD - It is used to model free stream compressible flow at infinity, with free stream mach number and static conditions specified. This is available only for compressible flows when density is calculated from ideal gas law.
6) OUTFLOW - It is used to model flow exits where flow velocity and pressure are not known prior to solution of the flow. It cannot be used for compressible flows, with pressure inlet boundary condition and in unsteady flows with variable density. Can be used with velocity inlet.
7) INLET VENT - It is used to model inlet vents with specified loss coefficient, flow direction and inlet pressure and temperature.
8) INLET FAN - It is used to model an external intake fan with specified pressure jump, flow direction and intake pressure and temperature.
9) OUTLET VENT - It is used to model an outlet vent with specified loss coefficient and discharge static pressure and temperature.
10) EXHAUST FAN - It is used to model an external exhaust fan with a specified pressure jump and discharge static pressure.
These boundary conditions help design and analyze the domain and model the flow through it.
Go to TOP
Once a system has been started by some external power source, the working fluids sustain the process on a self sustaining basis, suc...
A fin is a surface used to give directional stability to any object moving through a fluid such as water or air. The size of the fi...
The Segway PT also known as Segway Personal Transporter is the world's first self-balancing human transporter. The Segway ...
Ekranoplan is a Russian word which means 'screen craft' or 'skimmer'. It is not a plane nor is it a ship,...
Hi, I am Student of IIT Kharagpur. I am trying to simulate an underwater vehicle, ejecting air from its nose or mouth. I am wondering which boundary condition is to be used at nose or mouth of the under water vehicle from where it is ejecting air.
ReplyDeleteI will be very grateful to you, if you could help me in this regard.
please drop me a mail (sumityadavm@gmail.com) or reply in this thread.
Thanks,
--
Sumit Yadav
Senior Student of
Department of Chemical Engineering
Indian Institute of Technology Kharagpur
Kharagpur-721302
Mob. no.+91 7501379564 (Kgp)
E mail- sumityadavM@gmail.com
09ch3015@iitkgp.ac.in
It is very useful information
ReplyDeleteHi,
ReplyDeletewould you have any idea what the flow direction would be for the pressure far field? I am simulating a supersonic flow in a 2D nozzle jet and require to fill in parameters for X and Y direction.
Cheers,
Joel
I look forward to your reply. Thank you.
DeleteThis really is my very first time i visit here. I discovered so many entertaining stuff in your blog, especially its discussion. From the a great deal of comments on your own articles, I guess I'm not the only one having all of the leisure here! Maintain the wonderful work.temperzone
ReplyDeleteThank You so much for sharing this amazing post. If you want to hire a Pest Control Service in Gurgaon, then connect ZoopGo.
ReplyDelete